Reflective pavement marking paint comes as a single‑component, ambient‑cure system that needs no on‑site blending, no climate‑controlled shelters, and no short‑fuse usage window once opened. It holds its working properties through extended storage without special preservation, then goes down smoothly-sprayed, rolled, or brushed-on both fresh and weathered asphalt, plus concrete, in temperatures down to 5°C and in persistently damp air that would stall other coatings. The wet film grips the substrate with a hold that stands up to traffic abrasion and seasonal expansion cycles, while the low‑VOC chemistry keeps the job within environmental compliance guardrails. Pre‑incorporated retroreflective optics lock nighttime visibility into every line, making the stripe a round‑the‑clock signal even under low‑beam headlights and foul weather.
Strong Adhesion
Excellent Weather Resistance
Good Wear Resistance
Fast Drying Speed
Low VOC Emissions
Specification
|
Color |
White,Yellow other color could be customized |
|
Density (g/cm) |
1.7 |
|
VOC (g/kg) |
262 |
|
Viscosity (η), s |
149 |
|
Non-tire-sticking drying time (min) |
11 |
|
Hiding power (%) |
White: ≥95 Yellow: ≥80 |
|
Abrasive Resistance (mg) |
51 (Weight loss after 200 cycles under 1000g load) |
|
Adhesion (Circle-drawing method) |
2 grade |
|
Flexibility, mm |
1 |
|
Solid content (%) |
73.8 |
|
Package |
25KG/Barrel with Pallets |
APPLICATION
-
Desert Highway Emergency Stopping Bays & Sand Fence Warning Lines
Along arid highways, sand abrasion and extreme UV degrade markings quickly. This paint bites into asphalt emergency pull‑off areas, resisting grit blasting and intense sun. The reflective surface cuts through airborne dust at night, giving drivers clear stopping point cues when pulling over near sand barrier installations.
-
Utility Tunnel Internal Inspection Walkways
Inside underground utility corridors, constant dampness and poor ventilation challenge most coatings. Reflective pavement marking paint applies in confined spaces without solvent buildup, bonds to damp concrete floors, and its retroreflective elements guide inspection crews under emergency lighting-remaining legible through minor water ingress and high humidity year-round.
-
Cold‑Weather Vehicle Proving Ground & Ice Track Delineation
On frozen proving grounds, test engineers need reliable markings at 5°C and below. Reflective pavement marking paint retains flow and adhesion on chilled asphalt and concrete, cures without auxiliary heat, and the integrated beads return low‑angle headlight reflections for precise boundary assessment during winter vehicle dynamics testing.
Product Highlights
Rich color options
White, yellow, red, blue, green, black.
Fast-drying and wear-resistant
It dries quickly and can be opened to traffic 10 minutes after construction. With reasonable construction technology, it can maintain its performance for over 6 months.
Strong adhesion
When sprayed on a dry, clean working surface (with guaranteed film thickness), no peeling will occur.
Vibrant and aesthetic
The color is bright and complies with industry standards, with no yellowing, discoloration or cracking. It has high brightness and strong visibility.
Easy construction
No special requirements for construction machinery; both spraying and manual brushing are applicable.
Night reflectivity
With a guaranteed film thickness and surface-sprinkled glass beads, it provides strong reflective effect at night.
Company Strength
-
01
30+ Years of Manufacturing Excellence
Three decades of expertise have made Mate Star a master in coating raw material selection and formula development-curating premium, durable raw materials and refining formulas through thousands of tests to ensure optimal adhesion, weather resistance, and compatibility with diverse substrates.
-
02
Complete Product Ecosystem
From strict raw material testing to rigorous finished product quality control-ensuring top-tier coatings are reliably delivered to clients every time.
-
03
Reliable, Certified Quality
Every product meets strict global certifications (ISO, CE, etc.)
-
04
Innovation-Driven Global Support
Blending cutting-edge R&D with a worldwide service network, we deliver advanced solutions paired with localized support to maximize client value globally.
Our Department
We have a professional team, including departments for production, technology, sales, and marketing.
Factory Manager: Overall production management & scheduling R&D/QC: Formula R&D & product quality inspection Operators: Production process operation
Technical Engineer: Responsible for construction plan design and technology development;
Technical Support: Responsible for on-site technical guidance and after-sales support.
The Sales Director is responsible for sales strategy and team management;
the Foreign Trade Manager is responsible for overseas market development and order follow-up.
Marketing Specialist
(Brand Promotion/Exhibition):
Responsible for brand promotion and exhibition organization.
To cater to more needs, the products for overseas markets have been approved by ISO9000:2008 QMS and CE (15194) certifications.
Hot Tags: reflective pavement marking paint, China reflective pavement marking paint manufacturers, suppliers, factory, traffic marking paint shortage, Single Component Road Marking Paint, Cold Road Paint, Spray Paint For Parking Lines, spray paint road markings, parking lot line stripers
