Cold road marking paint eliminates heat-dependent equipment from the equation entirely. There are no boilers to fire up, no burners to monitor, no lag time while melters crawl toward operating range. It travels straight from the container onto asphalt or concrete using whatever is on hand-a spray machine, a roller, a standard brush. The wet film seizes the surface texture instantly, then hardens into a shell that withstands snowplow scraping, tire abrasion, and ultraviolet fatigue without delaminating. Retroreflective beads are already suspended in the liquid, so once applied, every line doubles as a night-readable marker that stays visible through rain, mist, and dim headlight angles that typically wash out ordinary markings. The solvent content is deliberately restrained to meet regulatory thresholds, pairing extended outdoor service with a reduced chemical load. In practice, that translates to an all-season, ambient-applied solution built to match the pace and scale of today's road infrastructure.

Strong Adhesion

Excellent Weather Resistance

Good Wear Resistance

Fast Drying Speed

Low VOC Emissions

Specification

Color	White,Yellow other color could be customized
Density (g/cm)	1.7
VOC (g/kg)	262
Viscosity (η), s	149
Non-tire-sticking drying time (min)	11
Hiding power (%)	White: ≥95 Yellow: ≥80
Abrasive Resistance (mg)	51 (Weight loss after 200 cycles under 1000g load)
Adhesion (Circle-drawing method)	2 grade
Flexibility, mm	1
Solid content (%)	73.8
Package	25KG/Barrel with Pallets

APPLICATION

Motorsport Pit Lane & Paddock Speed-Control Stencils

Across pit corridors and paddock backroads, the cured layer tolerates fuel splash, brake-fluid drips, and the sticky rubber residue carried off the racing line. Because it sets fast, track staff can re-stencil speed legends between race meets without lengthy closures, preserving tight discipline under constant operational stress.
Hospital Emergency Access & Rooftop Helipad Markings

Cold road marking paint applies directly to ambulance bays and rooftop helipads with minimal odor and operational disruption. It delivers skid-resistant, high-visibility boundaries that remain legible under floodlight glare and bad weather, allowing pilots and ambulance crews to navigate precisely at all hours.
Grain Drying Yards & Harvester Turning Areas

Laying down traffic paths and weighbridge approaches on concrete drying floors, the coating bears the bulk of loaded combines, abrasive grain dust, and occasional fuel soaking. It stays visible through peak harvest frenzy without immediate breakdown, then weathers gradually until the next season calls for a refresh.

Product Highlights

Rich color options

White, yellow, red, blue, green, black.

Fast-drying and wear-resistant

It dries quickly and can be opened to traffic 10 minutes after construction. With reasonable construction technology, it can maintain its performance for over 6 months.

Strong adhesion

When sprayed on a dry, clean working surface (with guaranteed film thickness), no peeling will occur.

Vibrant and aesthetic

The color is bright and complies with industry standards, with no yellowing, discoloration or cracking. It has high brightness and strong visibility.

Easy construction

No special requirements for construction machinery; both spraying and manual brushing are applicable.

Night reflectivity

With a guaranteed film thickness and surface-sprinkled glass beads, it provides strong reflective effect at night.

Company Strength

01

30+ Years of Manufacturing Excellence

Three decades of expertise have made Mate Star a master in coating raw material selection and formula development-curating premium, durable raw materials and refining formulas through thousands of tests to ensure optimal adhesion, weather resistance, and compatibility with diverse substrates.
02

Complete Product Ecosystem

From strict raw material testing to rigorous finished product quality control-ensuring top-tier coatings are reliably delivered to clients every time.
03

Reliable, Certified Quality

Every product meets strict global certifications (ISO, CE, etc.)
04

Innovation-Driven Global Support

Blending cutting-edge R&D with a worldwide service network, we deliver advanced solutions paired with localized support to maximize client value globally.

Our Department

We have a professional team, including departments for production, technology, sales, and marketing.

VIEW ALL SERVICES

Production Department

Factory Manager: Overall production management & scheduling R&D/QC: Formula R&D & product quality inspection Operators: Production process operation

Technology Department

Technical Engineer: Responsible for construction plan design and technology development;
Technical Support: Responsible for on-site technical guidance and after-sales support.

Sales Department

The Sales Director is responsible for sales strategy and team management;
the Foreign Trade Manager is responsible for overseas market development and order follow-up.