Your Professional Two Component Road Marking Paint Supplier
MateStar is a professional manufacturer of road marking paint, established in 2019 with an investment of 100 million yuan and located in Changxing County, Zhejiang Province, China.
Our best-selling products include thermoplastic road marking paint, luminous paint, water-based paint, and other liquid road marking solutions, as well as professional road marking equipment.
-
![Two Component Solvent Road Marking Paint]()
Two Component Solvent Road Marking PaintRoad marking paint factory Since 1986. . Regular Color: White/Yellow. MOQ: 1 Ton. Quick Delivery: 5-10 Days. Supporting: Free Samples . Application: transportation hub areas,airport aprons, port
-
![Two Component Acrylic Road Paint]()
Two Component Acrylic Road PaintRoad marking paint factory Since 1986. . Regular Color: White/Yellow. MOQ: 1 Ton. Quick Delivery: 5-10 Days. Supporting: Free Samples . Application: high-traffic urban arterial roads, key sections of
-
![MMA Road Marking Paint]()
MMA Road Marking PaintRoad marking paint factory Since 1986. . Regular Color: White/Yellow. MOQ: 1 Ton. Quick Delivery: 5-10 Days. Supporting: Free Samples . Application: high-traffic urban arterial roads, key sections of
-
![Mma Traffic Paint]()
Mma Traffic PaintRoad marking paint factory Since 1986. . Regular Color: White/Yellow. MOQ: 1 Ton. Quick Delivery: 5-10 Days. Supporting: Free Samples . Application: high-traffic road sections, bridges and expansion
Why Choose us
Quality Control
Certified under ISO international standards, with products compliant with GOST, BS EN, and AASHTO requirements, supported by a fully standardized, end-to-end quality control system.
Production Capacity
Annual production capacity includes 100,000 tons of thermoplastic road marking paint and 2,500 tons of room-temperature two-component paint.
Global Supply Chain
Products are exported to more than 50 countries and regions, including the Middle East, Southern Africa, Southeast Asia, South America, and North Africa.
Parameter
|
Color |
White,Yellow other color could be customized |
|
Density (g/cm) |
1.7 |
|
Application Performance |
Mix components A and B in the specified ratio (per manufacturer's requirements), stir evenly; good trowel application performance |
|
Tire-Non-Stick Drying Time (min) |
10 |
|
Coating Appearance |
After curing, no wrinkles, spots, blisters, cracks, peeling or sticking |
|
Abrasion Resistance (Weight loss after 200 rotations/1000g, mg) |
≤40 (JM-100 rubber grinding wheel) |
|
Water Resistance |
No abnormality after 24h immersion in water |
|
Alkali Resistance |
No abnormality after 24h immersion in saturated calcium hydroxide solution |
|
Adhesion (Cross-Cut Method) |
≤Level 4 (excluding glass beads) |
Benefits of Two Component Road Marking Paint
Durability
The molecular weight of the individual components is very small, which makes the markings have good permeability before the polymerization chemical reaction occurs; during the condensation process of the markings, the two components undergo polymerization chemical reactions, making the markings and the road surface strong bond.
Strong wear resistance
The polymerization reaction of the two components forms a network molecular structure. Each component in the paint is closely combined into a dense whole, that is, the network molecular structure formed by the two components makes it a polymer material with an extra-large molecular weight.
Strong weather resistance
Two-component road marking paint is not prone to low-temperature fracture or high-temperature softening, and has almost no aging during use, because the new network molecules formed after the polymerization reaction of the two components are polymers with extremely large molecular weights, and the new molecules do not contain active molecules.
Reflectivity
Room-temperature acrylic markings can hardly be used as reflective markings because the markings they draw form a film and the glass beads cannot effectively adhere. Hot-melt markings have relatively poor reflective effect and short lifespan.
Anti-Pollution
The hardness of the hot-melt marking material is low, and it is easy to soften at high temperatures in summer, and contaminants can easily enter the inside of the markings; while it is easy to crack at low temperatures, causing crack contamination.
Economy
Two-component road markings have a long service life and low maintenance and construction costs; there is no aging phenomenon in the markings, and re-construction is only to achieve aesthetic effects, without the need to clean up the old lines; the construction efficiency is high and losses caused by various hidden dangers are avoided.
Construction suitability
Acrylic marking paint at room temperature has poor construction applicability and cannot be constructed below 5°C. Moreover, due to the high flux content, it brings fire hazards to the construction. The construction adaptability of hot-melt markings is also very poor.
The hot melt material can be directly covered. In the case where the hot melt material is not severely damaged, the undercoating agent is not used. To some extent, extend its useful life.
High solid content. The cold-plastic road marking paints generally have a solid content of about 100%. Because of the high solid content, the VOC content is zero.
Drying time. Cold-plastic marking paint products are generally quick-drying, 600 um thickness is painted for 15 minutes non-stick tires, that is, in a short time can open traffic.
Two-component marking paint can be sprayed, squeegeed, and produced in various colors of color anti-skid road (marking line)
Two-component marking paints are suitable for internal and external mixing spraying, blade coating and so on. As a result, there are no obstacles to the applicable models.
No need to use the undercoating agent, can be painted on the original marking line.
Quality requirements completely exceed the domestic hot-melt marking standards. 1 mm thickness two-component marking, the service life can reach more than two years. Paint anti-ultraviolet, anti-aging, not easy to crack.
Compared with the ordinary pavement markings, the glass beads are sprinkled on the pavement while the coating is applied to the road, and some of them can be exposed to the air, so the reflective performance is excellent.
Material of Two Component Road Marking Paint
Thermoplastic
Water-based paint
MMA
Epoxy resin
Preparation: Clean and prepare the road surface.
Mixing: Follow the instructions to mix the two components of the paint.
Equipment Setup: Set up the paint sprayer with proper attachments.
Priming: Remove air from the system for smooth paint flow.
Test Application: Check spray pattern and adjust settings if needed.
Road paint Application: Apply the paint evenly along the desired markings.
Spread Glass Beads (optional): Add glass beads for increased visibility.
Drying and Curing: Allow the paint to dry and cure according to instructions.
Clean-up: Thoroughly clean the sprayer and equipment after use.
Shipping and Payment Information
|
Payment |
Trade Assurance, T/T, PayPal, Western Union, Visa, MasterCard, Discover |
|
Shipping |
DHL, TNT, EMS, FedEx |
Certificate
As one of the leading two component road marking paint manufacturers and suppliers in China, we specialized in providing high quality customized service. We warmly welcome you to wholesale cheap two component road marking paint for sale here and get free sample from our factory. For price consultation, contact us.
methyl methacrylate road markings, two component road marking paint, Two Component Acrylic Road Paint
