
Fluid

Durable

Economical

Retroreflective

Anti-slip
Thermoplastic Road Marking Paint for Brazil
MATESTAR supplies thermoplastic road marking paint for Brazil road contractors, importers, distributors, and public road maintenance suppliers.
Our hot-applied thermoplastic road marking materials are designed for highway lines, urban road markings, pedestrian crossings, parking areas, ports, industrial zones, and municipal road maintenance projects.
We provide white and yellow thermoplastic road marking paint, reflective glass beads, custom formula support, OEM packaging, and stable bulk supply from China. The formula can be adjusted according to project specifications, application method, road surface, climate conditions, glass bead requirements, and tender documents.
For Brazil buyers, we can support both regular road marking projects and higher-performance projects that require better reflectivity, wear resistance, bead anchorage, drying performance, and long-term visibility.
Material Termoplástico for Sinalização Horizontal
In Brazil, thermoplastic road marking paint is commonly related to terms such as material termoplástico para sinalização horizontal, tinta termoplástica para demarcação viária, termoplástico extrudado, and termoplástico por aspersão.
This type of road marking material is heated before application and forms a thick, durable marking layer after cooling. Compared with ordinary cold road paint, thermoplastic road marking paint is more suitable for roads with higher traffic volume, stronger wear, and longer service-life requirements.
MATESTAR thermoplastic road marking paint can be used for:
· Highway lane lines
· Urban road markings
· Center lines and edge lines
· Zebra crossings
· Parking lot markings
· Port and industrial area markings
· Municipal road maintenance
· Road safety improvement projects
For Brazilian road projects, the final formula should be selected based on traffic volume, road surface, required marking thickness, color, reflectivity requirement, application equipment, and local project specification.
Brazil Road Marking Standards and Project Requirements
Brazilian road marking projects may refer to DNIT, DNER, ABNT, DER, or specific tender requirements. For thermoplastic road marking materials, buyers usually need to pay attention to technical points such as material stability, glass beads, reflectivity, color, drying time, application thickness, wear resistance, and acceptance testing.
DNIT/DNER documentation includes DNER-EM 372/2000, which covers material termoplástico para sinalização horizontal rodoviária, and it also refers to glass microspheres used in thermoplastic material.
Glass beads are also an important technical item in Brazilian horizontal road marking systems. Research and industry sources commonly connect road marking retroreflectivity with the use of glass microspheres, and NBR 16184 is referenced for glass spheres and microspheres used in horizontal road markings.
For this reason, we do not recommend choosing thermoplastic road marking paint only by price. A suitable formula for Brazil should be selected according to the project standard, tender document, required reflectivity, glass bead type, road environment, and application method.
MATESTAR can provide:
· Technical Data Sheet
· SDS
· Sample testing support
· Formula adjustment
· Glass bead matching support
· Application guidance
· Export packaging support
· OEM bag design
Final compliance should be confirmed according to the buyer's local testing, project specification, or authority requirement.
Thermoplastic Paint Options for Brazil Road Conditions
Brazil road marking projects may involve different road surfaces, traffic loads, climate conditions, application methods, and reflectivity requirements. Therefore, the thermoplastic road marking paint formula should not be selected only by price.
For Brazil projects, MATSTAR can adjust the formula based on softening point, binder content, glass bead content, pigment system, filler gradation, melt viscosity, drying time, wear resistance, and retroreflective performance.
The following formula options can be used as a reference before confirming the final project specification:
1. Standard Thermoplastic Formula for General Road Marking
This formula is suitable for general urban roads, parking areas, municipal maintenance projects, and low-to-medium traffic roads.
It focuses on stable melting performance, smooth line formation, good whiteness, basic reflectivity, and cost control.
| Technical Item | Typical Reference Range |
|---|---|
| Application temperature | 180–220°C |
| Marking thickness | 1.5–2.0 mm |
| Softening point | 90–105°C |
| Drying time | ≤ 3 min |
| Premixed glass beads | 0–20%, based on project requirement |
| Drop-on glass beads | 250–400 g/m² |
| Packaging | 25kg/bag |
| Suitable road surface | Asphalt; concrete with primer if required |
This option is usually recommended when the project does not require a high-performance formula but still needs stable application, acceptable visibility, and regular service life.
2. High Reflective Thermoplastic Formula
This formula is designed for roads that require stronger night visibility and better retroreflective performance.
For this type of formula, the key is not only adding more glass beads. The final retroreflectivity depends on the balance between premixed beads, drop-on beads, bead roundness, bead gradation, refractive index, surface embedding depth, and bead anchorage.
| Technical Item | Typical Reference Range |
|---|---|
| Application temperature | 180–220°C |
| Marking thickness | 1.8–2.5 mm |
| Softening point | 95–110°C |
| Premixed glass beads | 20–30% |
| Drop-on glass beads | 300–450 g/m² |
| Glass bead refractive index | ≥ 1.5 |
| Glass bead roundness | ≥ 80–90%, depending on requirement |
| Drying time | ≤ 3 min |
| Main performance target | Higher initial and retained retroreflectivity |
For this formula, we recommend confirming the required retroreflectivity value from the tender document before production. If the project has a clear requirement for initial or maintained retroreflectivity, the glass bead type and application rate should be matched together with the paint formula.
3. High Softening Point Formula for Hot Climate and Heavy Traffic
Some regions in Brazil may have strong sunlight, high pavement temperature, and heavy vehicle load. Under these conditions, low-softening-point thermoplastic paint may soften, deform, collect dust, or lose line edges more easily.
For hot climate and heavy traffic areas, a higher softening point formula is recommended.
| Technical Item | Typical Reference Range |
|---|---|
| Softening point | 105–120°C |
| Application temperature | 190–220°C |
| Marking thickness | 2.0–2.5 mm |
| Drying time | ≤ 3 min |
| Binder system | Higher-temperature-resistant resin system |
| Filler system | Adjusted for anti-deformation and wear resistance |
| Premixed glass beads | 20–30%, based on reflectivity requirement |
| Main performance target | Better heat resistance and anti-deformation |
This formula improves the line's resistance to deformation under heat and pressure. However, a very high softening point may also affect low-temperature flexibility and melting behavior, so the formula should be balanced according to the actual project environment.
Extrusion and Spray Application Options
In Brazil, thermoplastic road marking materials may be used for different application methods, including extrusion, screed, and spray application.
MATESTAR can adjust the thermoplastic formula according to the buyer's road marking equipment and application requirement.
Extrusion / Screed Application
Extrusion or screed application is commonly used for thicker, durable road markings. It is suitable for highways, urban roads, zebra crossings, and heavy-traffic areas.
This method usually requires good flow stability, proper heating performance, strong bead anchorage, and stable line formation.
Spray Application
Spray thermoplastic application is suitable for projects that require faster work speed and thinner marking layers.
For spray application, the formula should have good melting behavior, stable viscosity, and smooth spraying performance.
Before confirming the formula, buyers should tell us the application method, marking thickness, equipment type, road surface, and project requirement.
Main Ports and Import Options for Brazil
For Brazil buyers, the destination port should be selected according to the project location, warehouse address, inland freight cost, customs broker arrangement, and shipping line availability.
For thermoplastic road marking paint exported from China to Brazil, Santos is usually one of the most practical import gateways. It is especially suitable for buyers serving São Paulo, Minas Gerais, Mato Grosso do Sul, and other central-southeast markets. For distributors, Santos is also a convenient option for containerized cargo, warehouse stocking, and inland delivery.
For buyers in southern Brazil, Paranaguá can be another practical choice. It is suitable for customers serving Paraná, Santa Catarina, Rio Grande do Sul, and nearby industrial or agricultural regions.
Other ports can also be considered depending on the buyer's delivery plan, such as Rio de Janeiro, Itajaí/Navegantes, Rio Grande, Suape, Salvador, Vitória, or Itaqui.
MATESTAR supports FCL shipment, LCL shipment, and sample orders. Our thermoplastic road marking paint is packed in 25kg bags, and one 20GP container can usually load around 26 tons, depending on pallet use, container weight limits, shipping line rules, and final loading confirmation.
For easier unloading and warehouse handling, buyers can choose palletized loading. For better container space usage and cost control, non-palletized loading can also be discussed.
This import plan is suitable for Brazil distributors, road contractors, government project suppliers, highway maintenance companies, parking lot marking suppliers, and buyers who need trial samples before bulk orders.
CUSTOMIZE ON DEMAND

- Customized colors
- Customized package&LOGO
- Customized formula & standard

Matestar Performance Test

-
Fast Application High-Fluidity, No clogging
Bright & Durable High Ti02, No Yellowing
Cost-Effective High Coverage, More m/kg
Night Visibility Instant Retroreflectivity
True Anti-Skid SRV≥45 |No PE Wax Sand Formula
Company Strength
-
01
30+ Years of Manufacturing Excellence
Three decades of expertise have made Mate Star a master in coating raw material selection and formula development-curating premium, durable raw materials and refining formulas through thousands of tests to ensure optimal adhesion, weather resistance, and compatibility with diverse substrates.
-
02
Complete Product Ecosystem
From strict raw material testing to rigorous finished product quality control-ensuring top-tier coatings are reliably delivered to clients every time.
-
03
Reliable, Certified Quality
Every product meets strict global certifications (ISO, CE, etc.)
-
04
Innovation-Driven Global Support
Blending cutting-edge R&D with a worldwide service network, we deliver advanced solutions paired with localized support to maximize client value globally.

Our Department
We have a professional team, including departments for production, technology, sales, and marketing.
Factory Manager: Overall production management & scheduling R&D/QC: Formula R&D & product quality inspection Operators: Production process operation

Technical Engineer: Responsible for construction plan design and technology development;
Technical Support: Responsible for on-site technical guidance and after-sales support.

The Sales Director is responsible for sales strategy and team management;
the Foreign Trade Manager is responsible for overseas market development and order follow-up.

Marketing Specialist
(Brand Promotion/Exhibition):
Responsible for brand promotion and exhibition organization.

To cater to more needs, the products for overseas markets have been approved by ISO9000:2008 QMS and CE (15194) certifications.

Hot Tags: thermoplastic road marking paint for brazil, China thermoplastic road marking paint for brazil manufacturers, suppliers, factory, Best Thermoplastic Paint, road marking paint, road sign paint, thermoplastic striping paint, White Line Paint For Roads, Yellow Reflective Road Paint








