Thermoplastic Markings Across Highway Applications
Highway marking requirements are not identical across every part of the road. Mainline lane lines, ramps, tunnels, toll plazas and warning sections
perform different traffic guidance functions and may place different demands on visibility, wear resistance, skid resistance and marking profile.
The final material specification, marking dimensions and application method should always be confirmed from the project drawings and actual tender
requirements.
Mainline & Edge Lines
Reflective thermoplastic markings for lane separation and continuous road-edge guidance, with specified line width, thickness and retroreflectivity.
Ramps & Interchanges
Thermoplastic arrows, lane transitions and hatched markings for merging, diverging and route guidance.
Bridges & Tunnels
Lane and edge markings configured to the pavement surface, visibility requirements and approved project drawings.
Toll Plazas & Warning Sections
Directional and specified rumble markings for toll approaches, curves, descents and other designated locations.
Service Areas & Parking
Parking bays, arrows and circulation markings for organized vehicle movement within highway service facilities.
Select the Thermoplastic Material for Your Road Marking Work
Choose the product type for the required marking and application method. MATESTAR can customize material properties to match the
specified thickness, line type and application requirements.
Reflective Thermoplastic Road Marking Paint
For highway lane lines, edge lines, arrows and hatched areas. Material grades are selected for screed, extrusion or spray application and matched with suitable drop-on glass beads.
Lane Lines · Edge Lines · Arrows · Hatched Areas
• Colours: White and yellow, other colours on request.
• Application: Screed, extrusion or spray, according to product grade.
• Thickness: According to the project specification and selected application method.
• Reflectivity: Class based configuration matched to the required performance.
Profiled / Rumble Thermoplastic Marking Material
For raised warning markings specified at toll approaches, curves, descents and other designated road sections. The material grade and forming equipment are matched to the required profile and dimensions.
Toll Approaches · Warning Sections · Specified Rumble Markings
•Marking Form: Raised profile according to the approved design.
•Dimensions: Profile thickness, height and spacing as specified.
•Application: Compatible profile-forming equipment.
•Customization: Material properties configured for project and climate requirements.
| Specification | Unit / Information to Confirm |
| Colour | White, yellow or specified colour |
| Applied Thickness | mm; line/thickness or specified profile dimensions |
| Softening Point | °C; required value and test method |
| Compressive Strength | MPa; required value and test conditions |
| Abrasion Resistance | Test method, load, cycles and permitted loss |
| Skid Resistance | Required value and test method |
| Intermix Glass Bead Content | % by mass, where specified |
| Retroreflectivity | mcd·m⁻²·lx⁻¹; colour, test condition and acceptance stage |
| Application Requirements | Material grade, equipment and recommended operating conditions |
Thermoplastic Road Marking Paint, Glass Beads & Equipment for Highways
MATESTAR supplies thermoplastic road marking paint, drop-on glass beads and road marking equipment for highway projects. Match the material grade, glass bead specification and application equipment to your marking requirements, with individual products or combined orders available.
Thermoplastic Road Marking Paint
Reflective and profiled thermoplastic materials for highway lane lines, edge lines, arrows and specified rumble markings. Material properties can be customized to your project specification.
Drop-On Glass Beads for Road Marking
Glass beads matched to the thermoplastic material and required retroreflectivity. Share your target reflective performance or specified bead requirements for a suitable recommendation.
Thermoplastic Preheaters & Road Marking Machines
Preheaters and marking machines selected for the material grade, application method and required output, including screed, extrusion, spray or profiled marking applications.
Get a Quote for Highway Road Marking
Tell us your application, specification and estimated quantity. We will help confirm the thermoplastic material, glass beads and any equipment required
for your project or support an existing or new tender with the information you already have.
For Contractors & Project Suppliers
Send your road marking drawings, bill of quantities or tender schedule. We will review the material grades, glass bead specifications and equipment requirements for your project.
For Importers & Distributors
Share your local specifications, packing preferences and expected order quantity. We can discuss suitable product grades, packaging and supply arrangements for your market.
Get in Touch with MATESTAR